Measure yourself: Chastity
Cage Length
Cage length
​Cages are a simple measurement, as it's just the length.
​
To get the best measurement, it's good to have a hot bath/shower first to encourage the blood flow to the area.
​
Please note that our measurements are in mm, so it's best to take your measurements in mm too.
​
Grab yourself a measuring tape and take the measurement:
​
Holding the "0" of the measuring tape at the base of your flaccid penis, drape the measuring tape down to the tip of your penis.
​
It's good to stand up with your back straight while you take the measurement.
​
Now, the ring is about 15mm long, so subtract 15mm from your measurement and that should give you the right length cage for you.
​Please note that the standard diameter size of our cages is 35mm. So if you measure a greater girth than a diameter of 35mm, please state your girth in the additional comments when enquiring. This may incur additional charges depending on the amount of extra time required for designing.
​
To measure this, wrap a tape measure around the thickest part of your penis and note the measurement in mm. Divide this number by pi (3.14). This will give you the diameter of the thickness of your penis.
Ring Size
Rings are measured by their diameter.
​
To get the best measurement, it's good to have a hot bath/shower first to encourage the blood flow to the area.
​
Please note that our measurements are in mm, so it's best to take your measurements in mm too.
​
Grab yourself a measuring tape and take the measurement:
​
Holding the "0" of the measuring tape at the base of your flaccid penis, drape the measuring tape down behind the back of your testicles, and up the otherside back up to the base of your penis again; mimicking how the base ring would sit around your junk.
​
This give you the circumference.
​
Now, to get the diameter, divide this number by pi (3.14).
Example conversions:
​
Circumference = 157mm ÷ 3.14 = 50mm
Circumference = 141mm ÷ 3.14 = 45mm
Circumference = 125mm ÷ 3.14 = 40mm